Panel Specifications |
Panel size (diagonal in inch): | 21.5 |
Panel resolution: | 1920 X 1080 Pixels |
Panel Aspect Ratio: | 16 to 9 |
Panel Type LCD: | Yes |
Panel Modulation IPS: | Yes |
Back-light LED: | Yes |
Brightness in cd/m²: | 300 |
Panel Bit depth:: | 8 |
Image Processing Bit depth: | 10 |
Panel response times in ms: | 8 ms |
Viewing angle H/V: | H 178 / V 178 |
Contrast Ratio: | 1500:01:00 |
IN-OUT´s Connections VIDEO |
Input HDSDI: | Yes, 3G |
Number of HDSDI Inputs: | 2 |
HDSDI DUAL LINK: | Yes |
Input HDMI: | Yes |
Number of HDMI Inputs: | 1 |
HDMI HDCP: | Yes |
Input YUV: | Yes, 3 x BNC |
Input Composite: | Yes |
Numbers of Composite Inputs: | 2 |
Loop out HDSDI: | Yes, 2 with bridge function |
Loop out Composite: | Yes |
IN-OUT connections AUDIO |
Audio Line IN: | Yes, 2 x RCA and 1 x 3.5mm mini jack |
Audio Embedded Channel out: | Yes, selectable |
Speaker integrated: | Yes, 2 |
Watts: | 2 X 1 Watts |
IN-OUT Connections Controls |
GPI IN: | Yes, RJ45 |
RS485/422 IN: | Yes, RJ45 |
RS485/422 Loop out: | Yes |
RS232 IN: | Yes, 9 Pin Sub D |
Service Port: | Yes, internal |
Supported Signal Formats |
Note for SMPTE/ITU Definitions: | SMPTE or ITU definitions have servile specification in-between, like SMPTE 274 for Interlace Frames rates for example, this is not reflecting here! Please ask for details Signal Spec´s and Frame-rate supports |
HDSDI/SD Signal Formats SMPTE-424M: | Yes |
HDSDI/SD Signal Formats SMPTE-425M-A/B: | Yes |
HDSDI/SD Signal Formatss BTA S-004C: | Yes |
HDSDI/SD Signal Format SMPTE-292M: | Yes |
HDSDI/SD Signal Formats DUAL-LINK or 3G SMPTE-372M-2002: | Yes |
HDSDI/SD Signal Formats ITU-R BT656: | Yes |
SDI SIgnal Formats SMPTE-259M: | Yes |
Signal Format ITU BT601-7: | Yes |
Signal Format SMPTE-299M: | Yes |
Signal Format SMPTE-272M: | Yes |
HDMI Format 1080P plus: | up to 1080P |
Composite: | Yes, PAL/NTSC |
Dedicate Functions |
SDI Timecode: | Yes, LTC, VITC, and D-VITC |
R/G/B/Mono: | Yes |
H/V delay: | Yes, only with special upgrade |
Field/Frame mode: | Yes, Field 1 / Field 2 / Reverse only with special upgrade |
Scan Modes: | Progressive,/Field Cinema 3:2 pull down / 1:1 |
Safety area markers: | Yes, 80% to 100% |
Center Marker: | Yes |
Scale Markers: | Yes, 4:3/16:9/14:9/13:9/2.35:1/1.85:1/1.75:11.66:1 |
Area Marker Visibility: | OFF,Line,Half,Half+Line |
Tally via GPI: | Yes |
Tally Multi-Color: | Yes |
Low Latency Mode: | Yes |
Screen saver: | Yes |
Environment Power Save function: | Yes |
TSL UMD/IMD Support via:: | Yes, Serial RS485 |
Function Keys: | 2 |
Direct Input Channel buttons: | Yes |
Auto Aspect: | Yes, Analogue and Digital sources |
OPERATION KEY-LOCK: | Yes |
Operation LED Dimmer (Buttons): | Yes |
Direct Brightness/Contrast/Color control: | Yes |
Measurement and indication Tools |
Waveform: | Yes |
Waveform enlargement: | Yes |
Waveform subs: | R/G/B, Y/PB/PR, and Y/CB/CR. peak brightness with Over-level function. |
Vector-scope: | Yes |
Vector-scope enlargement: | Yes |
Vector-scope subs: | video,component, SDI (SD/HD) input signals. |
Histogram: | Yes |
Audio Level Meter: | Yes |
Audio Level Meter Channels: | 16 |
Audio Level Meter subs: | Over Level Indication plus Lissajous Meter |
Calibration and Color settings |
Preset Color Temperature 9300K: | Yes |
Preset Color Temperature 6500K: | Yes |
Preset Color Temperature 5600K: | Yes |
Preset Color Temperature USER:: | Yes |
Manual calibration of Color Temperature (gain or/and cut-off): | Yes |
External Auto-Calibration (Software Tool): | Yes |
External Colormetrie Sensor needed: | Yes, Minolta CA-210, X-Rite i1 Display 2, i1 Display 3/Pro (OEM version), Jeti Specbos (with FTDI driver v.2.8.24), Datacolor Spyder4 |
Calibration Hints:: | Free Calibration Software in our Support area |
Gamma Levels: | 2.2/ ,2.35,/2.45,/2.6 |
Adjustable Back-Light: | Yes |
Dedicate Timing Information |
Lip-sync. Processing time:: | less 1 Frame |
MTBF Life-Times |
MTBF Notes:: | MTBF Data are based on theoretical Mathematics-calculations, the values therefore are just a guess of reference life time estimation. |
MTBF Panel (Back-light) :: | 30000 hours |
MTBF electrical:: | 0 hours |
Power and Enviroment Spec´s |
Power AC: | Yes |
Power DC: | Yes, 12V-17V |
DC Connector Type:: | 4 PIN XLR |
Power consumption: | 0.39 Ampere /AC 5 A DC |
Operation Temperature in Celsius: | 5C to 35C |
Operation Humidity:(Non-Condensing): | 20% to 80% |
Storage Temperature in Celsius: | -20C to 60C |
Storage Humidity (Non-Condensing): | 10% to 90% |
Mechanical Informations |
VESA Mount: | Yes |
VESA Format: | 100x100 |
VESA Screw Type in Metric: | M4x4mm |
Rack-mount into 19" Format: | Yes, optional |
Dimensions W x H x D in mm: | W:515mm / H:347mm / D:99.8mm |
Weight (without stand) in Kg:: | 6.2Kg |
Weight in Kg:: | 8.6Kg |
Include Package |
AC Power cord: | Yes |
Others: | CD Rom detail instructions , Power cord Holder, srews |
Instruction Doc:: | Yes |
General Editing Note |
General Note: | Simulated pictures.The values for weight and dimensions are approximate .E.&O.E. Design and specifications subject to change without notice. |